Although the aluminum veneer industry is an emerging industry, it has only been in my country for more than 30 years, but its growth rate is very fast, the market size is already very large, and the market competition is becoming increasingly fierce. Where there is a market, there will be competition, and where there is competition, the emergence of vicious competition is inevitable. In today's aluminum veneer market competition, various unfair competition behaviors have appeared. Some companies do not know how to innovate due to the limitation of their own capabilities, so they imitate the aluminum veneer products of other well-known brands. Copycats are not uncommon in the market.

　　After several years of development, there are currently five types of aluminum veneer processes, which are roll coating, spray coating, film coating, baking varnish, AO anodizing and other above-mentioned processes. Among them, the panels made by spraying and baking varnish are prone to chromatic aberration and have a shorter operating life. There is no color difference between the two processes of film coating and coating, and at the same time, the operating life is relatively long, while the AO anodized plate is to place aluminum and its alloy in the response electrolyte (such as sulfuric acid, chromic acid, oxalic acid, etc.), As an anode, it undergoes electrolysis under specific conditions and impregnated current, so that the layout of its aluminum molecules will produce leather, thereby forming a protective layer on the surface of aluminum. In fact, the aluminum or alloy parts of the anode are oxidized, forming a thin layer of aluminum oxide on the surface, increasing the hardness and wear resistance, enhancing the anti-falling function, improving the heat resistance and insulation, and the breakdown resistance up to 2000V The voltage and the small amount of micropores contained in the oxide film layer has a strong adsorption capacity, so the AO anodizing process can ensure that it will not fade. It is these processes that can bring out the characteristics of aluminum veneer.

　　When purchasing aluminum veneer, choose aluminum veneer neither too thin nor too thick. A good quality aluminum veneer only needs 0.02 to 0.03mm on the coating root. The thickness of the peritoneum only needs to be below 0.18mm, but if it is lower than this thickness, the strength will be compromised. However, if the aluminum veneer is too thick, it will increase its weight. Therefore, the aluminum veneer can neither be too thin nor too thick, and a moderate thickness is best.

　　Aluminum veneer cannot be made of recycled aluminum. The recycled aluminum powder is repeatedly processed and used. The aluminum contained in it is not only low in purity, containing many impurities, but also not environmentally friendly. It contains a lot of heavy metal elements, such as lead and chromium. , Nickel, potassium, etc. Because the cost of recycled aluminum is not high, the lead content in it is high, which can easily lead to lead poisoning. At the same time, due to the low strength of recycled aluminum, it does not have good flatness, poor toughness, and unevenness after installation.

　　In the fierce market competition, the survival of aluminum veneer enterprises is the core competitiveness. The core competitiveness here mainly includes two aspects, namely the service provided by the enterprise and the quality of the aluminum veneer products provided. Ensure that the quality is up to standard, meet various requirements, and provide comprehensive and thoughtful services. Only then can we ensure that our company has a good core competitiveness and have capital to compete with opponents.

　　Improve the ability to design and develop aluminum veneer products. Although aluminum veneer companies are processing enterprises, they produce and process products according to the different needs of customers. However, aluminum veneer companies should also keep production records, understand the actual needs of customers in time, and design various aluminum veneer products that can meet customer needs according to the different needs of customers.